A
Page 20 / 30
Product Description
RPW404P-FTL
Datasheet 1.10-65.030-01-EN
Issue 2017-04-03
When vacation mode is active, the room control module is in economy mode and
control is based on the setpoint for vacation mode, see page 24.
The display also shows the
(house without little man) symbol.
At the end of vacation mode, the comfort mode becomes active at 0.00 for a duration
of 6 h.
Delete vacation mode
To abort vacation mode, you must set vacation duration to "00d" = 0 days.
The settings procedure is the same as previously described.
Setting the time and date
The hour, minutes, year, month and day can be set in sequence.
The values to be set flash.
►
Hold down the “Occupancy button” for 5 seconds.
The text “
Menu
” briefly appears on the display, followed by “
SETP
”.
►
Release the “Occupancy button”.
►
Briefly press the “Occupancy button” repeatedly or the “
”
button to select the “
Conf
” function.
►
Hold down the “Occupancy button” for 5 seconds.
The “Set vacation” menu item appears in the display.
►
Briefly press the “Occupancy button” repeatedly or the “
”
button to select the “
TIME
” button.
►
Hold the “Occupancy button” down for 5 seconds or
press the “
” or “
” button.
The display switches to the menu item for setting the “Time and date”.
The value being set flashes.
►
Press the “Occupancy button” or the “
” or “
” button once to
confirm the hour displayed or press it several times/hold it down
until the required set value is reached.
►
Release the “Occupancy button” or the “
” or “
” button.
The next value to be set will start to flash after approximately 3 seconds.
The procedure for setting the minutes, year, month and day is the same as that for
setting the hour.
NOTE
Press the “Occupancy button” or the “
” button to increase the current value by +1.
Holding down the “Occupancy button” or the “
” button increases the value sequentially.
