background image

A

Page 27 / 28

Datasheet 1.10-65.020-01-EN

RPW301-FTL

Product Description

Issue 2017-12-20 from V3.02

Malfunction messages

Transmission function malfunctioning

The radio connection is continuously monitored. The “Δ8” icon appears on the display if a trans-
mission function malfunction is detected in the en:key room sensor.
The following troubleshooting procedures can be implemented:

Restore the en:key room sensor to its default setting (see page 18).

The “Δ8” icon disappears from the display.

Register the radio partner again.

The en:key room sensor has a serious malfunction if the “Δ8” icon continues to appear. It should be 
checked by an authorized service technician.

NOTE

If the room sensor transmission function is malfunctioning, the valve controllers continuously operate 
in comfort mode without reducing to economy mode.

System time

The en:key room sensor's internal system time is monitored constantly. The “Δ3” icon appears on the 
display if a system time malfunction is detected in the en:key room sensor.

Reset the time (see page 19).

The “Δ3” icon disappears from the display.

The en:key room sensor has a serious malfunction if the “Δ3” icon continues to appear. It should be 
checked by an authorized service technician.

Icon/display

State

Explanation

Antenna
Δ8, Er08

Off
On

Transmission function on the RPW301-FTL malfunctioning

Δ3, Er03

On

System time malfunction at RPW301-FTL

Summary of Contents for RPW301-FTL





























Reviews: