KIDWELL PICO ROTRPIC01A1, User Manual

Page: 16 / 28

16 16
Wheel positions
6
7
8
Using the bike as a tricycle
Start separating the rear wheels from each other by removing the security rod. In order
to spread the rear wheel arms, press the rear wheel folding/unfolding button (see picture
- step 2). As soon as you hear the arms making a ‘’click” sound, that will mean that they
are properly separated.
After spreading the wheels, block their movement by putting the security rod
in the sleeves for unfolded wheels.
WARNING: The bike has two pairs of security rod openings: the ones located closer
to the saddle are used to block the wheels in a tricycle position, and the ones located
closer to the wheels are used to block the wheels in a two-wheel balance bike position.
In order to put the wheels in a riding position, press the buttons located at the ends of
the rear wheel arms, right next to the wheels. Once you do that, turn the wheels to set
them in the riding position (see the picture).
Using the ride-on bike option
Start separating the rear wheels from each other by removing the security rod. In order
to spread the rear wheel arms, press the rear wheel folding/unfolding button (see picture
- step 2). As soon as you hear the arms making a ‘’click” sound, that will mean that they
are properly separated.
In order to put the wheels in a riding position, press the buttons located at the ends
of the rear wheel arms, right next to the wheels. Once you do that, turn the wheels to set
them in the riding position (see the picture).
When the wheels are in the correct position (outside of the rear wheel arms), fold the
arms back, and lock them with the security rod by inserting it into the sleeves as shown
in the picture
WARNING: The bike has two pairs of security rod openings: the ones located closer
to the saddle are used to block the wheels in a tricycle position, and the ones located
closer to the wheels are used to block the wheels in a two-wheel balance bike position.
balance bike - pedals should not be attached
ride-on
- pedals should not be attached
three-wheeled bike - attached pedals
A
B
C
CLEANING AND MAINTENANCE
• The product should be cleaned using a damp with a water and soap solution cloth.
• Do not use sti
ff
brushes or objects with sharp or rough edges to clean the product.