KIDWELL PICO ROTRPIC01A1, User Manual

Page: 15 / 28

15
1
2
3
4
5
Start the assembly of the balance bike with the front wheel. Put the pedal holder
(see element no. 4 - PRODUCT COMPONENTS ) onto the front wheel head tube.
WARNING: The pedal holder has two protrusions which should be directed downwards
in order to connect to the fork (see drawing 1).
A. Put the rod protruding from the top of the front wheel construction through the bike
frame. Once you do that put the handlebars onto the protruding rod.
WARNING: You need to put a connecting screw simultaneously through both,
the protruding rod and the lower part of the handlebars. This is why both, the
protruding rod and the lower part of the handlebars have openings which should be
aligned and through which the connecting screw should be put.
B. Put the screw through the openings securing it with a cap on the other side. Tighten
the screw properly with a cross screwdriver.
A. In order to release the clamp, pull the lever away from the saddle. After you release
the clamp, you can place the saddle in the opening. Remember to adjust the height
of the saddle to the height of the child!
B. In order to lock the saddle at a desired height, close the clamp by pushing it towards
the saddle.
In order to change the position of the handlebars, press and hold the handlebars
adjustment button and adjust it to a desired position.
Pedal assembly
A. In order to attach the pedals onto the wheels, put the pedals into the opening
located on the sides of the front wheel. Just like in the case of the pedal holder, you
must put the pedals in so that the blocking pins become visible in the openings
WARNING: Do not use the pedaling option if the blocking pins are not visible in the
openings or the pedals were not put in properly in a way that the blocking pins could
not get through the openings. Take them out and put them in properly.
Pedal holder
B. Put the pedals in the holder located right above the front wheel. The pedals have
blocking pins which should be put in the holder in a way that they get through
the holder and become visible in the openings in the holder.