61
→
H:
Install and evenly space 5 (1850) Siding in the large opening between (1849) Cedar Sidings, attaching to (1500)
Post and 2 (1814) Wall Supports with 3 (S0) #8 x 7/8” Truss Screws per board. (1850) Siding should be flush to
outside edge of (1500) Post. (fig. 29.6 and 29.7)
I:
Remove the (LS3) 1/4 x 3” Lag Screw (with flat washer) from the top of (0369) Lower Diagonal and have a helper
hold it to the right of the assembly while installing the next siding pieces. (fig. 29.6 and 29.7)
J:
In the small opening between (1849) Cedar Sidings attach and evenly space 5 (1848) CE Siding flush to outside
edge of (1500) Post and to (1814) Wall Support with 2 (S0) #8 x 7/8” Truss Screws per board.
(fig. 29.6 and 29.7)
K:
Pre-drill with a 1/8” drill bit though (1848) CE Siding then re-attach (0369) Lower Diagonal to (1500) Post with
the previously removed (LS3) 1/4 x 3” Lag Screw (with flat washer).
L:
Attach (1849) Cedar Siding to each (1814) Wall Support with 3 (S0) #8 x 7/8” Truss Screws per siding.
(fig. 29.7)
Step 29: Lower Front Wall Assembly
Part 3
→
→
Hardware
Wood Parts
Fig. 29.8
0369
x 3 per board
1849
Remove this lag
S0
1814
x 3 per board
S0
x 2 per board
S0
1814
1849
1849
1850
1848
Flush
0369
Fig. 29.7
Fig. 29.6
46 x
#8 x 7/8” Truss Screw
5 x
Siding 3/8 x 3-1/2 x 26-3/4”
5 x
CE Siding 3/8 x 3-1/2 x 9”
1850
S0
1848
LS3
1500
1500
(hidden behind boards)
Diagonal not shown for clarity
All (1850) Siding and (1848)
CE Siding should be evenly
spaced to ensure there are
no gaps. (fig. 29.7 and 29.6)