43
Hardware
Other Parts
Fig. 20.1
2 x
#12 x 1” Pan Screw
5 x
#8 x 1/2” Pan Screw (#8 flat washer)
2 x
#12 x 1” Pan Screw (3/16” flat washer)
1 x Cafe Canopy
1 x Cafe Canopy Frame
S6
Step 20: Attach Cafe Canopy to Fort
A:
Feed Cafe Canopy Frame through the pocket of the Cafe Canopy. (fig. 20.1)
B:
With a helper, hold the Cafe Canopy Frame against the (1500) Posts on the Cafe Wall. The top of the canopy
should rest on top of (1501) Floor End. (fig. 20.1)
C:
Attach Cafe Canopy Frame to (1500) Posts with 1 (S6) #12 x 1” Pan Screw per side. (fig. 20.1)
D:
Make sure the Cafe Canopy is smooth and tight then attach to the front face of (1501) Floor End with 5 evenly
spaced (S5) #8 x 1/2” Pan Screws (with #8 flat washer). On each side of the Cafe Canopy, measure 1-1/2” down
from the top of (1501) Floor End and 1/2” in from each edge of the canopy then install 1 (S6) #12 x 1” Pan Screw
(with 3/16” flat washer) to each side. (fig. 20.2)
S5
S5
1501
with #8
flat washer
1500
1500
S6
1501
1500
Cafe Canopy Frame
Cafe Canopy
Side Wall
Fig. 20.2
1-1/2”
S6
S6
S6
with 3/16”
flat washer
with 3/16” flat washer