29
2 x
#8 x 1-1/8” Wood Screw
2 x
#8 x 1/2” Pan Screw
6 x
#8 x 7/8” Truss Screw
1 x
Window Dormer Cleat 5/4 x 2 x 8”
2 x
Cedar Roofing 3/8 x 3-1/2 x 48”
Step 9: Roof Assembly
Part 4
K:
On the front of the Roof Assembly, on the sixth (0517) Cedar Roofing from the bottom, place (0522) Window
Dormer Cleat centred over the middle screw. Use the Dormer Assembly as a guide to make sure the spacing is
correct, pre-drill using a 1/8” drill bit, then attach (0522) Window Dormer Cleat to Roof Assembly from underneath
the assembly with 2 (S1) #8 x 1-1/8” Wood Screws. (fig. 9.7)
L:
Hang the Dormer Assembly on the tenth (0517) Cedar Roofing and attach the Dormer Assembly to (0522)
Window Dormer Cleat with 2 (S5) #8 x 1/2” Pan Screws as shown in fig. 9.7.
M:
Attach the 2 remaining (0517) Cedar Roofing to the Roof Assembly, leaving no gaps, with 3 (S0) #8 x 7/8”
Truss Screws per board. (fig. 9.8)
Hardware
S1
S0
Fig. 9.7
0517
S5
x 3 per board
Fig. 9.8
0517
S0
0522
0517
10th
6th
Front
S1
Wood Parts
0522
0517
S5
Dormer Assembly