29
Step 13: Chalk Wall Assembly
Hardware
Wood Parts
12 x
#8 x 1/2 Pan Screw (with #8 flat washer)
4 x
#8 x 1-1/8 Wood Screw
S1
1 x
Lower Back Wall 1 x 4 x 31-1/2”
A:
Place the Chalk Wall Tarp in between each (0359) Front Divider and (1758) Top Back. Make sure tarp is
smooth and tight and then attach to (1758) Top Back with 3 (S5) #8 x 1/2” Pan Screws (with #8 flat washer).
Tighten the bolts in both (0359) Front Dividers. (fig. 13.1)
B:
Recheck that tarp is smooth and tight and then measure 4” up from the bottom of the tarp on each side and
attach Chalk Wall Tarp to both (0359) Front Dividers from the inside of the assembly with 1 (S5) #8 x 1/2” Pan
Screws (with #8 flat washer) per board. Evenly space and attach with 2 more screws per side. (fig. 13.2)
C:
3” above (1762) Floor Back attach (1754) Lower Back Wall to each (0359) Front Divider with 4 (S1) #8 x 1-1/8”
Wood Screws. (fig. 13.3)
D:
Attach Chalk Wall Tarp to (1754) Lower Back Wall with 3 (S5) #8 x 1/2” Pan Screws (with #8 flat washer). (fig.
13.4)
S5
Fig. 13.1
Fig. 13.2
Fig. 13.4
S5
S1
Fig. 13.3
3”
S5
Other Parts
1 x Chalk Wall Tarp
1754
1758
0359
0359
0359
0359
0359
0359
1754
1754
1762
S5
S5
4”
Summary of Contents for F24148E
Page 42: ...NOTES 42 42...
Page 43: ...NOTES 43 43...
