18
Step 3: Swing Beam
Fig. 3.1
Side with
Overhang
H8
Fig. 3.2
Fig. 3.3
Fig. 3.4
G5
G8
1 x
SW Rail Block 2 x 4 x 5-3/8”
Hardware
Wood Parts
1 x
1/4 x 4-1/4” Hex Bolt
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
1 x
5/16 x 4-1/2” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
1 x
5/16 x 2” Hex Bolt
(5/16” flat washer x 2, 5/16” lock nut)
H8
G5
A:
Place (4919) SW Rail Block in the centre between (1773) CE SW Beam Front and (1772) CE SW Beam Back
and attach beams with 1 (H8) 1/4 x 4-1/4” Hex Bolt (with flat washer, lock washer and t-nut). (fig. 3.1 & 3.2)
B:
Attach Swing Beam Assembly to the side of the Swing End Assembly with the overhang (fig. 3.3) using 1 (G5)
5/16 x 4-1/2” Hex Bolt (with lock washer, flat washer and t-nut) in the top hole of Triangle Plate and 1 (G8) 5/16 x
2” Hex Bolt (with 2 flat washers and lock nut) in the bottom hole of Triangle Plate. (fig. 3.3) Make sure Swing End
Assembly flares out at an angle. (fig 3.4)
G8
4919
4919
1773
1772
Summary of Contents for F24148E
Page 42: ...NOTES 42 42...
Page 43: ...NOTES 43 43...
