16
Step 1: Swing Beam Assembly
Warning: For your childs safety,
orientate the swing hangers as
shown to ensure your swing will
have proper swing motion when
installed. Failure to do so could
result in premature failure of the
swing hanger or swing chain.
Bolt Thru Hangers
Fig. 1.1
Fig. 1.2
Front
Back
Front
Back
Make sure triangle is
tight against beam
Important!
Fort End Side
(No Overhang)
Important!
Swing End
(With Overhang)
Triangle Plates
1 x
CE SW Beam Front 2 x 6 x 69-1/2”
1 x
CE SW Beam Back 2 x 6 x 69-1/2”
Hardware
Wood Parts
Fig. 1.3
Other Parts
4 x Bolt Thru Swing Hangers
1 x Triangle Plates (pkg of 4)
x 4
x 4
A:
In the middle holes of (1772)
CE SW Beam Back install 2 Bolt
Thru Swing Hangers making sure
the swing hangers are oriented in
the direction shown in fig. 1.3 to
maintain proper swing motion.
B:
In the end holes of (1773) CE
SW Beam Front install 2 Bolt-Thru
Swing Hangers making sure the
swing hangers are oriented in
the direction shown in fig. 1.3 to
maintain proper swing motion.
C:
Attach 1 (H7) 1/4 x 5-1/2” Hex
Bolt (with lock washer, flat washer
and t-nut) to the ends of each
(1772) CE SW Beam Back and
(1773) CE SW Beam Front. The
bolts do not attach to anything, but
MUST
be installed to the beams to
prevent splitting and checking of
wood. (fig. 1.1)
D:
Attach 1 Triangle Plate to each end of both the (1773) CE SW Beam Front and (1772) CE SW Beam Back using
1 (G1) 5/16 x 1-1/2” Hex Bolt (with lock washer, flat washer and t-nut) per Triangle Plate in the hole indicated in fig.
1.2.
Correct hole usage is very important.
Refer to fig 1.2 for correct placement of Hex Bolts.
4 x
5/16 x 1-1/2” Hex Bolt
(5/16” lock washer, 5/16” flat washer and 5/16” t-nut)
4 x
1/4 x 5-1/2” Hex Bolt
(1/4” lock washer, 1/4” flat washer and 1/4” t-nut)
G1
H7
H7
G1
1773
1772
1772
1773
1773
1772
Summary of Contents for F24148E
Page 42: ...NOTES 42 42...
Page 43: ...NOTES 43 43...
