95
Warning!
Must be tight to
(051) Front Wall Panel on both sides
Warning!
Check entire play
center for bolts protruding beyond
T-Nuts. Use extra washers to
eliminate this condition.
Step 45: Attach Slide to Fort
Note: Pre-drill all holes using a 1/8” drill bit before installing the pan screws.
A:
Place Slide centred in the opening of the (051) Front Wall Panel. Slide must be tight to the outside of (051)
Front Wall Panel. (fig. 45.1)
B:
Attach slide to fort using 3 (S7) #12 x 2” Pan Screws. (fig. 45.1)
Fig. 45.1
Hardware
051
3 x
#12 x 2” Pan Screw
S7
Other Parts
1 x Slide
Slide
S7
Warning!
Must be tight to
(051) Front Wall Panel on both sides
(Brockwell / Twin
Mountain Lodge)
Summary of Contents for BROCKWELL
Page 101: ...101 NOTES...
