KIDDY Evostar Light 1, Instruction Manual

Page: 19 / 154

11
EN
4.9 Adjustment of the parking brake
To set the parking brake push the pedal downwards (fig. 17, no. 1).
Don‘t let go of the stroller until you are sure that the parking brake is
fully engaged.
To loosen the parking brake push the pedal downwards again (fig. 17,
no. 1).
4.10 Adjustment of the reclined / upright position
To adjust the reclining position pull the handle upwards and turn si-
multaneously the backrest in one of the positions (fig. 18, a–b–c).
Ensure that the backrest is fully engaged at both sides. After adjust-
ing the inclination, check the belt length and readjust it.
For newborns up to 6 months the lowest lie-flat position (fig. 18, c) is
intended.
5. Securing the child with the 5-point belt system
5.1 Opening the 5-point belt system
Push the button in the middle of the buckle (fig. 19, no. 1) and the
buckle tongues will come outwards (fig. 19, no. 2).
5.2 Adjustment of the 5-point belt system and securing the child
Place your child in the seat unit, put the shoulder belts over child’s
shoulder and place the buckle between the legs of the child. Fit togeth-
er the two connectors on the harness straps and push firmly into the
buckle housing until they click together (fig. 20). Check by hand pull
tests whether the belt system is locked securely.
The length of the belt system can be adjusted by sliding the two belt
adjusters at the shoulder belts and the belt adjuster at crotch belt
(fig. 21).
In order to optimize the child’s posture, the end of the crotch belt
can be anchored in two different positioned holes (fig. 22, a + b). To
remove the crotch belt, push the plastic clip at the end through the