KIDDY Evostar Light 1, Instruction Manual

Page: 18 / 154

EN
10
If you want to remove the sun canopy proceed like described above
in reverse manner.
4.6 Adjustment of the sun canopy
Remove the back panel (fig. 14, no. 1).
Height adjustment by pushing the two buttons of the lower adjust-
ment option (fig. 12, no. 1) and simultaneous sliding between four
positions (fig. 12, a–d). Opening and closing by pushing at the front
frame (fig. 13, a–b–c–d).
Re-install the back panel (fig. 14, fig. 2 + 3).
4.7 Removing and attaching the back wheels
To remove the back wheels at each side push the button in the mid-
dle of the rim (fig. 15, no. 1) and pull out the wheel set simultaneously
(fig. 15, no. 2).
To attach the back wheels at each side push the button in the middle
of the rim (fig. 15, no. 1) and plug simultaneously the horizontal axis in
the hole of each wheel support until it clicks into place (fig. 15, no. 3).
Check by hand pull tests whether both back wheels are locked se-
curely to the frame.
4.8 Locking the swivel front wheels
To lock a front wheel set bring it in “straight forward” direction and
turn the locking switch above the wheel set clockwise at left front
wheel (fig. 16, no. 1) and counterclockwise at right front wheel (fig. 16,
no. 2).
To release the wheel set turn the locking switch counterclockwise at
left front wheel (fig. 16, no. 3) and clockwise at right front wheel (fig. 16,
no. 4).