![background image](http://html.mh-extra.com/html/kidde/kn-cosm-b-rf-ca/kn-cosm-b-rf-ca_user-manual_1965307027.webp)
27
Maintenance
To keep your smoke/CO alarm in good working order, please follow
these simple steps:
• Verify unit alarm, lights and battery operation by pushing the
test/reset button once a week.
• Remove the unit from attachment stud and vacuum the alarm
cover and vents with a soft brush attachment once a month to
remove dust and dirt.
REINSTALL IMMEDIATELY AFTER CLEANING AND THEN TEST
USING THE TEST/RESET BUTTON!
• Never use detergents or other solvents to clean the unit.
• Avoid spraying air freshener, hair spray or other aerosols near the
smoke/CO alarm.
Do not paint the unit. Paint will seal the vents and interfere with
the sensor’s ability to detect smoke and CO. Never attempt to
disassemble the unit or clean inside. This action will void your
warranty. Move the smoke/CO alarm and place in another location
prior to performing any of the following:
• Staining or stripping wood floors or furniture
• Painting
• Wall papering
• Using adhesives
Storing the unit in a plastic bag during any of the above projects will
protect the sensors from damage. Do not place near a diaper pail.
WARNING: Reinstall the smoke/CO alarm as soon as
possible to ensure continuous protection.
When household cleaning supplies or similar contaminates are
used, the area must be well ventilated. The following substances
can effect the CO sensor and may cause false readings and damage
to the sensor: methane, propane, isobutane, iso-propanol, ethyl
acetate, hydrogen sulfide, sulfide dioxides, alcohol-based products,
paint, paint thinner, solvents, adhesives, hair spray, aftershave,
perfume and some cleaning agents.