TM206
28 of 35
Issue 1.0
Press the
ENTER
button to select this function. The yellow disabled LED will be lit and the display will
show:
Turn the
ENABLE CONTROL
keyswitch off to leave the disablement active. To re-enable the manual
release facility, repeat the procedure above.
15.2.3 Disable Stage 1 output
To disable the 1
st
Stage relay output, press the
UP
button on the module while at access level 2 until the
display shows:
Press the
ENTER
button to select this function. The display will show:
The yellow disabled LED will be lit.
Turn the
ENABLE CONTROL
keyswitch off to leave the disablement active. To re-enable the Stage 1
relay output repeat the procedure above.
15.2.4 Disable Stage 2 output
To disable the 2
nd
Stage relay output, press the
UP
button on the module while at access level 2 until the
display shows:
Press the
ENTER
button to select this function. The display will show:
The yellow disabled LED will be lit.
Turn the
ENABLE CONTROL
keyswitch off to leave the disablement active. To re-enable the Stage 2
relay output repeat the procedure above.
15.2.5 Disable Released output
To disable the Released relay output, press the UP button on the module while at access level 2 until the
display shows:
Press the
ENTER
button to select this function. The display will show:
The yellow disabled LED will be lit.
