10
6. Installa0on Instruc0ons – Moun0ng
THIS ALARM MUST BE INSTALLED BY A COMPETENT PERSON AND IS TO BE INSTALLED
ACCORDING TO THESE INSTRUCTIONS
Wall-moun0ng (recommended by the manufacturer, if
possible)
1. Using bracket as a guide, drill two holes in a wall 7cm (2 3/8”) apart.
2. Insert the two fixings, that are supplied, into the holes.
3. Slide bracket on to screws then /ghten.
4. Slide alarm onto base plate to ac/vate it, and remember to test it.
5. The alarm is tamper-proof and can only be removed using a screw driver.
Free-standing
ALWAYS BE CAREFUL TO LOCATE A FREE-STANDING ALARM WHERE IT IS UNLIKELY TO BE
KNOCKED TO THE FLOOR, AND IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS -
RECOMMENDED LOCATIONS SECTION.
Ensure free-standing alarms are placed in the upright posi/on, and not lying flat on a surface.
9
Wall Moun0ng
2539-7201-05_10LLCO_10LLDCO_V1:_ 2016.11.2 9:06 AM Page 10