Kidde Fire Systems Natura, Owner'S Manual

Page: 9 / 32

General Information
P/N 06-237620-001 1-1 June 2020
CHAPTER 1
GENERAL INFORMATION
1-1 INTRODUCTION
This document is provided to instruct and familiarize the owner with the Kidde Fire Systems
Natura
™
Inert Gas Fire Suppression System (Natura IGS system) with IG-100, IG-541, IG-55,
or IG-01 or IG-55 (herein refer to collectively as the “Agent”). This manual covers:
•
Information about the system
• How the Natura IGS system operates
• How the agents works
• Instructions in case of fire
• Post-operation instructions
• Inspection and maintenance of the system
• Responsibilities and related equipment requirements
Important: This owner's manual does not cover every detail of step-by-step installation
procedures for the Natura IGS systems.
The system consists of components tested within the limitations defined in the detailed Natura
IGS DIOM, P/N 06-237619-001. The system designer must be consulted whenever changes
are planned for the system or area of protection.
A certified Kidde Fire Systems distributor must be consulted after the system has been
discharged. The technical data contained herein is limited strictly for informational purposes
only.
Follow the instructions in this manual and on the cylinder nameplates. Review this information
semi-annually, or as needed. Place this manual in an accessible place near the fire suppression
system for ready reference.
Kidde Fire Systems believes this data to be accurate, however, it is published and presented
without any guarantee or warranty whatsoever. Kidde Fire Systems disclaims any liability for
the information contained herein by any, and all, other parties.
NAME OF KIDDE FIRE SYSTEMS DISTRIBUTOR IS:
_____________________________________________________________
ENTER EMERGENCY NUMBER FOR THE LOCAL FIRE DEPARTMENT HERE:
_____________________________________________________________
Before handling Kidde Fire Systems products, all personnel must be trained in the safe handling
of the cylinders as well as in the correct procedures for installation, removal, filling and
connection of other critical devices, such as solenoids, cable assemblies, pressure switches and
safety caps. READ, UNDERSTAND and ALWAYS FOLLOW the operation and maintenance
manuals, owner’s manuals, service manuals, etc., that are provided with the individual
systems.
CAUTION
It is the owner's responsibility to read, understand, and follow the
instructions in this manual and to ensure correct system operation and
personnel safety.