6
JUMPER CABLES (OPTIONAL)
KickAss 1000 Amp Jumper Cables have been designed to give you the optimum
starting power in the case of a flat starter battery. When it comes to Jumper Cables
there is no substitute for quality and these KickAss Jumper Cables have been designed
to be tough, durable and most of all, work flawlessly when you need them.
Note:
Ÿ
Do not use jumper cables with lithium batteries.
Ÿ
Leave the jumper cables connected to the flat battery for 5 minutes before
attempting to jump start battery.
CABLE LENGTH 2M
YOUR FLAT
BATTERY
SURGE PROTECTED
SWITCH/BUTTONS
The Master Switch
The master switch disconnects everything (except for the
large 175 amp Anderson style plug) from the battery including
the DC-DC Charger. Turning it off is a quick way to disconnect
all devices to ensure your battery is not being drained.
Note: The DC-DC C Solar Regulator cannot charge
the internal battery while the Master Switch is in the OFF
position, nor can an external charger.
If another, external battery is connected through one of the
IN/OUT connectors, the DC-DC is able to charge that battery,
even with the Master Switch in the OFF position - bypassing
the internal battery.
The Voltmeter
The inbuilt voltmeter will display the voltage of your battery.
For an accurate voltage reading, disconnect all loads and
charging sources from the power station and test.
Note: The battery voltage table on the top sticker of the
battery box is to be used as a guide only, check your battery
specifications if you want to be precise.
.
12V DC
OFF
ON
