39
Kice Industries, Inc.
012420 / FLT-M02-0004
Appendix C Continued
Page 3 of 4
I&M No. V_6583_R12
©
ASCO Valve, Inc.
50 Hanover Road, Florham Park, New Jersey 07932 www.ascovalve.com
NOTE:
Some solenoid constructions have a plugnut/core tube sub-
assembly, bonnet gasket and bonnet in place of the solenoid base sub-
assembly. To remove bonnet use special wrench adapter supplied in
ASCO Rebuild Kit. For wrench adapter only, order ASCO Wrench Kit
No. K218948.
4.
The core is now accessible for cleaning or replacement.
5.
If the solenoid is part of a valve, refer to basic valve installation and
maintenance instructions for further disassembly.
6.
Reassemble using exploded views for identi
cation and placement
of parts.
ORDERING INFORMATION
FOR ASCO SOLENOIDS
When Ordering Solenoids for ASCO Solenoid Operators or
Valves, order the number stamped on the solenoid. Also
specify voltage and frequency.
solenoid with
1/2" NPT
wave washer
valve bonnet
bonnet gasket
plugnut/core tube
sub
-
assembly
core
Remove red cap and
push solenoid down.
Then pry here to lift
nameplate/retainer
and push to remove.
For special wrench
adapter order kit
No. K218948
spring
washer
0.750
-
28UN
-
2A thread
0.9375
-
26UNS
-
2A thread
Tapped hole in core
0.250
-
28UNF
-
2B
0.38 minimum full thread
red cap
nameplate/
retainer
grounding
wire - green or
green with
yellow stripes
solenoid with
1/2" NPT
solenoid base
sub
-
assembly
core
(AC)
core
(DC)
Remove red cap and
push solenoid down.
Then pry here to lift
nameplate/retainer
and push to remove.
Side View
collar to face
valve body
spring washer
3/4" Bonnet Construction 15/16" Bonnet Construction
Alternate Construction
Figure 1. Series 8016G/H solenoids
red cap
nameplate/
retainer
spacer
solenoid
spring washer
valve bonnet
core tube
Bolted Bonnet Construction
Figure 2. Series 8016G/H
solenoids
solenoid with
1/2" NPT
1.312 diameter
mounting hole
retainer
spring washer
valve bonnet
bonnet gasket
plugnut/core tube
sub
-
assembly
core
red cap
nameplate/retainer
solenoid with 1/2" NPT
grounding wire
-
green or green
with yellow stripes
.062 to .093 max.
thickness of panel
for mounting
For special wrench
adapter order kit
No. K218948
3/4" Bonnet Construction
red cap
nameplate/retainer
Remove red cap and
push solenoid down.
Then pry here to lift
nameplate/retainer
and push to remove.
spring washer
0.69 diameter
mounting hole
solenoid base
sub-assembly
core
15/16" Bonnet Construction
Figure 3. Series 8016G/H panel mounted solenoids
Torque Chart
Part Name
Torque Value in Inch-Pounds
Torque Value in Newton-Meters
solenoid base sub-assembly
175 ± 25
19,8± 2,8
valve bonnet (3/4" bonnet construction)
90 ± 10
10,2 ± 1,1
bonnet screw (3/8" or 1/2" NPT pipe size)
25
2,8
bonnet screw (3/4" NPT pipe size)
40
4,5