manualshive.com logo in svg

Kia K2500 2014, Owner'S Manual, Page: 79 / 262

Share
Download
Kia K2500 2014 Owner'S Manual Download Page 79

Knowing your vehicle

70

3

1

2

3

4

5

6

7

8

9

• When connecting the iPod, use the

USB/AUX terminals.

• When disconnecting the iPod, dis-

connect both the USB/AUX termi-
nal.

• The iPod exclusive cable must be

connected to both the USB/AUX
terminals for iPod charging and
operations to be supported.

AUX

This feature is used to play external
MEDIA currently connected with the
AUX terminal. AUX mode will automat-
ically start when an external device
becomes connected. If an external
device is alreadyconnected, you can
also press the 

key to change

to AUX mode.

❈ 

AUX mode cannot be started unless
there is an external device connected to
the AUX terminal.

AUX

• Fully insert the AUX cable into the

AUX terminal for use.

AUX

Detachable USB/AUX

All-in-one USB/AUX

Summary of Contents for K2500 2014







































































































































































































































































Reviews:

No comments