manualshive.com logo in svg

Kia K2500 2014, Owner'S Manual, Page: 206 / 262

Share
Download
Kia K2500 2014 Owner'S Manual Download Page 206

7 17

Maintenance

1

2

3

4

5

6

7

8

9

Owner maintenance precau-
tions  

Improper or incomplete service may
result in problems. This section gives
instructions only for the maintenance
items that are easy to perform.

✽

✽

NOTICE

Improper owner maintenance dur-
ing the warranty period may affect
warranty coverage. For details, read
the separate Kia Warranty &
Maintenance book provided with
the vehicle. If you're unsure about
any servicing or maintenance proce-
dure, we recommend that the system
be seviced by an authorised Kia
dealer.

WARNING

- Maintenance

work

• Performing maintenance work

on a vehicle can be dangerous.
You can be seriously injured
whilst performing some main-
tenance procedures. If you lack
sufficient knowledge and expe-
rience or the proper tools and
equipment to do the work, we
recommend that the system be
servied by an authorised Kia
dealer.

• Working in the engine room

with the engine running is dan-
gerous. It becomes even more
dangerous when you wear jew-
elry or loose clothing. These
can become entangled in mov-
ing parts and result in injury.
Therefore, if you must run the
engine whilst working in the
engine room, make certain that
you remove all jewelry (espe-
cially rings, bracelets, watches,
and necklaces) and all neck-
ties, scarves, and similar loose
clothing before getting near
the engine or cooling fans.

Summary of Contents for K2500 2014







































































































































































































































































Reviews:

No comments