manualshive.com logo in svg

Kia K2500 2014, Owner'S Manual, Page: 73 / 262

Share
Download
Kia K2500 2014 Owner'S Manual Download Page 73

Knowing your vehicle

64

3

1

2

3

4

5

6

7

8

9

USING YOUR USB DEVICE

• To use an external USB device,

make sure the device is not con-
nected when starting up the vehi-
cle. Connect the device after start-
ing up.

• If you start the engine when the

USB device is connected, it may
damage the USB device. (USB
flashdrives are very sensitive to
electric shock.)

• If the engine is started up or turned

off whilst the external USB device
is connected, the external USB
device may not work.

• It may not play inauthentic MP3 or

WMA files.

1) It can only play MP3 files with

the compression rate between
8Kbps~320Kbps.

2) It can only play WMA music files

with the compression rate
between 8Kbps~320Kbps.

• Take precautions for static electricity

when connecting or disconnecting the
external USB device.

• An encrypted MP3 PLAYER is not

recognizable.

• Depending on the condition of the

external USB device, the connect-
ed external USB device can be
unrecognizable.

• When the formatted byte/sector

setting of External USB device is
not either 512BYTE or 2048BYTE,
then the device will not be recog-
nized.

• Use only a USB device formatted to

FAT 12/16/32.

• 

USB devices without USB I/F
authentication may not be recog-
nizable.

• Make sure the USB connection ter-

minal does not come in contact with
the human body or other objects.

• If you repeatedly connect or dis-

connect the USB device in a short
period of time, it may break the
device.

• You may hear a strange noise when

connecting or disconnecting a USB
device.

• If you disconnect the external USB

device during playback in USB
mode, the external USB device can
be damaged or may malfunction.
Therefore, disconnect the external
USB device when the audio is
turned off or in another mode. (e.g,
Radio or CD)

• Depending on the type and capacity

of the external USB device or the type
of the files stored in the device, there
is a difference in the time taken for
recognition of the device.

• Do not use the USB device for purpos-

es other than playing music files.

• Playing videos through the USB is not

supported.

• Use of USB accessories such as

rechargers or heaters using USB
I/F may lower performance or
cause trouble.

• If you use devices such as a USB

hub purchased separately, the vehi-
cle’s audio system may not recognize
the USB device. In that case, connect
the USB device directly to the multi-
media terminal of the vehicle.

(Continued)

Summary of Contents for K2500 2014







































































































































































































































































Reviews:

No comments