USB PLAYER
④
USB PLAYBACK
For control and playback of your USB mass storage device via the car radio, the USB device
must be connected to the car radio using the supplied USB cable, as pictured above.
1) Gently open the mini USB socket cover
④
on the front of the radio.
2) Connect the mating mini USB connector of the supplied connecting cable to this socket.
3) Connect the supplied cable to the USB device. The radio will automatically switch to
USB mode and music playback will begin.
To change to a different mode, press MODE button
⑥
.
Note:
a.
When the USB device is selected,
READING
is displayed while the contents of the USB
device are being checked by the car radio.
b.
When USB playback begins, the letter ‘U’ appears on the left hand side of the display,
indicating the current USB file access reading mode is for MP3 / WMA playback.
c.
If there are no compatible music files found on the USB device, the radio returns to the
previous mode and displays
NO FILE
.
d.
The USB file music playback function uses the same controls and features as used for the
playback of MP3 and WMA files from a CD. Please refer to page 26 to 28 for details of
how to control music playback using USB as the file source.
e.
Only 32 character file names are displayed.
f.
Only FAT, FAT12, FAT16 and FAT32 file systems are supported.
g.
Only ID3 tags V1.1, V2.2 and V2.3 are supported.
h.
Use of MULTI-CARD READER devices may not work correctly
i.
Files containing DRM will not be played. Please refer to page 37.
④
-1 CHARGING
When connected to the car radio using the supplied cable, the USB device will be charged
whilst the radio is operating.
Note:
Effective battery charging of USB devices using socket
④
cannot be assured. Check the
specifications of your USB device with the specification section on page 40 of this manual.
⑥
④
29
