background image

1.  Always remove the plug from socket-outlet when not in use, before cleaning or maintaining the appliance. 
2.   For optimal performance, follow the instruction below to clean and maintain the robotic vacuum regularly. 
 

The cleaning frequency will depend on your usage habits.

 

Recommended cleaning frequency:

Cleaning & Maintenance

Parts 

Cleaning Frequency

Filters 

Once every week

Rolling Brush 

Once every week

Side Brushes 

Once every month

Brush Guard 

Once every month

Sensors 

Once every month

Charging Pins  Once every month
Swivel Wheel 

Once every month

Dust Container and Filters
1.  Press the dust container release button to pull  

 

it out.

Water Tank and Mopping Cloth
1.  Press the Water Tank release button to pull  

 

it out.

2.  Open and empty the dust container.

3.  Take out the foam filter and    

 

high-performance filter.

7.  Dry the dust container and filter and keep the robot  

 

vacuum dry at all time to ensure its service life.

 

•  Please ensure the high efficiency filter screen and  

  

the primary filter screen are dry before installing.

 

•  Do not expose the high efficiency filter screen  

 

  and the primary filter screen to the sun.

8.  Put the filters and pre-filter back into the dust  

 container.

4.  Clean the dust container and filters with a  

 

cleaning brush or soft brush.

5.  Use water to rinse the primary filter screen.

6.  The dust container can be scrubbed with soft cloth.
 

•  Do not allow water flow into the fan port during  

 

  cleaning process.

2.  Remove the Mopping Cloth from the  

 

Water Tank.

3.  Open the water inflow hole cover  

 

and empty water from Water Tank.

6.  Water Tank can be dried with dry cloth or let it  

 

naturally dry with air.

4.  Use water to clean the Mopping Cloth.

5.  Dry the Mopping Cloth with sunlight.

Rolling Brush
1.  Pull on the release tabs to unlock the brush guard as shown.
2.  Lift the rolling brush to remove.
3.  Clean the rolling brush with the provided cleaning tool or soft brush.
4.  Reinstall the rolling brush by inserting the fixed protruding end first and then clicking into place.
5.  Press down to snap the brush guard unto place

3

5

4

2

1

3

4

EN

EN

Summary of Contents for VC9E31











Reviews: