Braille Labeler BL-1000
33
Line feed code (10)
New page code (12)
Carriage Return (13)
In the case of those codes are continuously received, BL-1000 goes through since
the second code and manage them as one time to start a new paragraph.
4. Transaction of received data
BL-1000 uses the port that received the first text, in ports of Communication
port and or USB one.
BL-1000 doesn’t print dots on a braille tape, which received text through other
port, until it completely prints all of the first text.
BL-1000 starts to print dots after it receives whole text as one line. It stops to
receive following text by Handshake.
Cut the tape of printed dots, and push Set key, then it starts to receive following
text again.
In the case of the last part in the text doesn’t have the code to start new
paragraph and or page, it takes one seconds, and then start to print dots on
tape.
