Braille Labeler BL-1000
5
1.2 Precautions on use
To preserve and maintain the conditions of the BL-1000, please take note of the
following precautions listed below.
♦
Do not drop, neither strike, nor apply strong shock to BL-1000, since it
is a precision instrument.
♦
Avoid spilling water, tea, dryings and etc, into BL-1000.
♦
Do not keep or stock BL-1000 and braille tape for BL-1000 exclusive
use in the place where the direct rays of the sun pours and or in the
place where it becomes high temperature like in the car, close to
window or stove or so on.
♦
Do not disassemble BL-1000. By disassembling the BL-1000, no
guarantee is made.
♦
Use an attached AC adaptor only for BL-1000 exclusive use. Please do
not use other kinds of AC adaptor. It has to be so danger if you’ll use
other kinds of adaptors.
♦
Use a braille tape only for BL-1000 exclusive use. It will be malfunction
and or cause to break BL-1000 like stuffed tapes and or bad quality of
embossed dots, if you’ll use other kinds of tapes.
♦
Use BL-1000 after closing the lid and or cover to be opened and closed
to avoid gathering dust.
♦
Please make sure to fix the cover of both print and braille tape to each
portion to be set.
♦
Do not the following actions to prevent clogged tape inside BL-1000.
♦
Do not cut the tape on the way of to print dot, to send and or rewind
tape.
♦
Do not print at less remains of tape.
♦
Please confirm the braille tape position to be fixed inside the tape guide
rail, which is located in the right side of cover for dots print, before
print.
♦
Please change the braille tape at less remains of tape.
♦
If pieces of the braille tape will be remained inside of BL-1000, please
open the cover for dots print and remove them by a pair of tweezers and
etc.
