Protector Operation Manual
MegaHertz
Keywest Technology
14563 W. 96
th
Terrace
Lenexa, Kansas 66215
800.331.2019
www.keywesttechnology.com
27
10 July 2000
Frame Count:
Adjusts time of transition between keyframes.
Mode:
Press the CTRL button to access the control mode of the active keyframe while in
sequencing mode. This control toggles between START, PAUSE, CONT (continue), LOOP,
and STOP.
Border:
Press the BORDER button to access and toggle between border on and border off
function.
SIZE=xx
—Slide to select border size value (from 00 to 15)
RED=xx
—Slide to select red component of the border color value (00-15).
GREEN=xx
—Slide to select green component of the border color value (00-15).
BLUE=xx
—Slide to select blue component of the border color value (00-15).
KEY
—when the LCD indicates this option, rotate the encoder to toggle between the following
KEY options:
INSERT:
Fills background (area not covered by compressed video signal) with genlock signal
(see paragraph f1 above).
FULL:
Outputs a full KEY signal for use with color background or external devices
OFF:
Disables KEY signal.
CROP:
Press the CROP button to toggle CROP on and off
TOP=xx
—Slide to select crop value for top of full screen image
BTM=xx
—Slide to select crop value for bottom of full screen image
LEFT=xx
—Slide to select crop value for left edge of full screen image
RIGHT=xx
—Slide to select crop value for right edge of full screen image.
HORZ PHA
: Slide to adjust the horizontal phase value. This allows for horizontal position of
background (genlocked) video
SC PHASE
: Slide to adjust the sub-carrier phase value. This option is used to control the color
phase of a genlocked image (similar to Hue).
