Keystone KSTAP12B, Instruction Manual

Page: 11 / 48

Installation
Tools Needed
-Medium Philips screwdriver; -Tape measure or ruler; -Knife or scissors;
-Saw (optional, to shorten window adaptor for narrow windows)
Accessories
Your Window Installation Kit fits windows 67.5-123cm(26.5-48”) and can be shortened for smaller
windows.
Window Installation Kit
Press the exhaust hose into the window slider adaptor and unit adaptor, clamp automatically by elastic
buckles of the adaptors.
Step One: Preparing the Exhaust Hose assembly
Step Two: Install the Exhaust hose assembly to the unit
Step Three: Preparing the Adjustable Window Slider
1. Depending on the size of your window, adjust the size of the window slider.
2. If the length of the window requires two window sliders, use the bolt to fasten the window sliders
once they are adjusted to the proper length.
Window slider A Window slider B
Bolt
Insert unit adaptor of the Exhaust hose assembly into the lower groove of the air outlet of the unit while
the hook of the adaptor is aligned with the hole seat of the air outlet and slide down the Exhaust hose
assembly along the arrow direction for installation.
Hook
Hole Seat
Lower groove
adaptor
Make sure the adaptor is inserted into the lower
groove of the air outlet.
Part Description
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pc
2 pc
1 set
1 set
Unit Adaptor
Window Slider Adaptor
Window Slider A
Window Slider B
Exhaust Hose
Bolt
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Security Bracket and 2 Screws
Drain Hose
Drain Hose Adaptor(only for
heat pump mode)
Quantity
Remote Controller and Battery
(For remote control models only)
O
N /O
FF
TE
M
P
SH
OR
T
C
UT
TI
M ER
O
N
TI
M ER
O
FF
M
OD
E
FA
N
SL
EE
P
SW
IN
G
LE
D
Unit adaptor Window slider adaptor
Exhaust hose
Exhaust hose assembly
6