Keystone KSTAP12B, Instruction Manual

Page: 10 / 48

Installation
Choosing The Right Location
5
Your installation location should meet the following
requirements:
-Make sure that you install your unit on an even
surface to minimize noise and vibration.
-The unit must be installed near a grounded plug,
and the Collection Tray Drain (found on the back
of the unit) must be accessible.
-The unit should be located at least 30cm (12”)
from the nearest wall to ensure proper air condi-
tioning.
-DO NOT cover the Intakes, Outlets or Remote
Signal Receptor of the
unit, as this could cause damage to the unit.
NOTE:
All the illustrations in the manual are for explanation purpose only. Your machine
may be slightly different.
The actual shape shall prevail.
The unit can be controlled by the unit control panel alone or with the remote
controller. This manual does not include Remote Controller Operations, see the
<<Remote Controller Instruction>> packed with the unit for details.
Recommend Installation
50cm
19.7inch