3.1 - Installation Instructions
Installing the Mini Port Replicator Software for Mac OS
Note: These instructions apply to installing the Keyspan Mini Port
Replicator on Mac OS 8.6 through 9.x. If you are installing this
software on Mac OS X via CLASSIC, please read the Keyspan USB
Serial Software for Mac OS X User Manual or visit Keyspan's
web page <http://www.keyspan.com> before proceeding.
Step 1
-
Insert the Keyspan Serial Adapter CD-ROM
Turn your computer ON. When your computer starts up, place the Keyspan Mini Port
Replicator CD into the CD-ROM drive. When the CD icon appears on your desktop, double click
on this icon to display its contents.
Locate the Keyspan Mac OS 8.6 - 9.x folder and then locate the Keyspan Installer for Mac OS.
Step 2
-
Run the Keyspan USB Serial Software for Mac OS Installer
If the Keyspan Adapter is connected to your computer, disconnect it now.
Run the Keyspan installer for Mac OS by double clicking the Install Keyspan MPR icon. This
will start the installer. Once the installer is running, follow the instructions on screen.
The installer will install the following items:
• " KeyspanUSBLoader"
(in the Extensions folder)
• "KeyspanUPSH112Drvr"
(in the Extensions folder)
• "
Keyspan Serial Assistant
"
(in the Control Panels folder)
• "Keyspan Manager"
(in the System Folder folder)
Step 3
-
Software Installation Complete!
Now that you have installed the Keyspan Mini Port Replicator software, you are ready to install the
Keyspan Mini Port Replicator hardware. Please proceed to the installing the Keyspan Mini Port
Replicator Hardware instructions.
Keyspan:Mini Port Replicator for Mac OS-v2.6 User Manual
This User Manual applies to the Keyspan Mini Port Replicator Software for Mac OS.
(rev 02jun20JA)
Page 5