Once you have selected the Keyspan serial port, click the
OK
button to save your changes.
Please note that you may have to restart your emulated environment (ie Windows).
Configuration is now complete. You must now open your serial device's software and tell it to
use
COM1
or
COM2
as per that device's instructions.
7.1.c.03.b - VirtualPC - Method 2
This method assumes that you have already done the following:
1.
installed the VirtualPC
software
2.
installed your serial device's
software
in Windows (in VirtualPC)
3.
connected your serial device
hardware
to a Keyspan serial port
4.
uninstalled any Keyspan MAC software
5.
installed the Keyspan serial port
Windows
software
6.
installed the Keyspan serial device's
hardware
If you have not performed any of the steps mentioned above, please do so before proceeding.
Keyspan USB Serial Adapter Software v2.x for Mac OS X User Manual
Rev 2006aug07 Page 31
