Keysight V3500A, User Manual

Page: 77 / 122

Driver Installation and Commands 3
V3500A User’s Guide 57
Measurement speed control commands
N O T E
Sending a value using this command results in taking averages of 2
x
measurements (where x =
<Value>
).
For example:
• Sending
SETAVG<1><LF>
causes the average factor to take 2
1
or 2
measurements
• Sending
SETAVG<2><LF>
causes the average factor to take 2
2
or 4
measurements
• Sending
SETAVG<3><LF>
causes the average factor to take 2
3
or 8
measurements
When <Value> = 0, (sending
SETAVG 0
), the number of measurements
is set to 1, and is equivalent to averaging disabled.
Command Name
Get averaging factor
Description This command reads and returns the averaging factor, which
is equal to log
2
(number of measurements per average).
Syntax
AVG?<LF>
Response
<Value>
Comments A value of 0 is equivalent to having averaging turned off.
Command Name
Set normal speed mode
Description This command sets the V3500A to normal speed mode.
Syntax
NMODE<LF>
Response
OK
Comments Normal speed mode is the default mode of operation.
The V3500A accuracy specifications apply in normal mode.
Measurement speed is level- dependent.