5
Setting up an E5405A Soft Touch Midbus Probe Configuration for U4421A Module
42
Keysight U4421A MIPI D-PHY Analyzer and Exerciser Hardware and Probing Guide
3 Surface finishes on pads should be HASL immersion silver, or gold over nickel.
4 This footprint is compatible with Keysight model number E5403A retention module.
5 Plated through hole should not be tied to ground plane for thermal relief.
Pinout Details for E5405A Probe
The following table shows the pinout details for the E5405A probe. While designing the DUT circuit
board to which the E5405A probe is connected via a retention module, you need to follow the pinout
details tabled below.
Figure 20
Pinout table for E5405A probe
