U1701B Quick Start Guide
How to Enter Setup Mode
Press and hold
and power on the instrument from OFF status.
Release
when you hear a beep, the instrument will then enter
setup mode. These parameters will be remained in the non-volatile memory
even after the instrument is turned off. To configure the related parameters
on setup mode, ensure that the following procedures are followed:
1
Press
(Left) or
(Right) to select the menu item to be set.
2
Press
(Up) or
(Down) to change the parameter.
3
Press
to select the digit to be adjusted, the selected digit will
flash.
4
Press and hold
for more than 1 s to save your setting.
5
Press
for more than 1 s to exit setup mode.
Features and Functions
Actions
Steps
To power ON or OFF
Press
To enable data hold function
Press
To trigger holding next reading
Press
momentarily
To exit data hold mode
Press
for more
than 1 s
To enable recording function
•
The beeper will beep when a new MAX or MIN
value has been recorded.
•
The static recording captures stable values and
updates the memory. It will not record values that
are overloaded, OL or below 10 count value.
Press