Multi-Channel BERT 12.5 Gb/s User Guide
15
1.11
N4965A Multi-Channel BERT Controller Installation
1.
Install on a flat surface with unobstructed airflow to the back panel and right-
hand side of the N4965A.
2.
Plug the AC power cord into the N4965A controller, rear panel power socket.
3.
Plug the AC power cord into a suitable wall socket (100 to 240 V AC, 50/60
Hz).
1.12
N4955A-P12/N4955A-D12 Installation
1.
Connect the N4955A-P12/N4955A-D12 PRBS Generator(s) to the N4965A
controller Channel 0.
2.
Connect the N4965A to a clock source and the N4955A-P12/N4955A-D12
(s) to a high speed sampling scope as shown in Figure 3. Tighten coax
connectors to 8 lb-in (90 N-cm) and use 50 Ω terminations on all unused
ports.
3.
Turn on the N4965A.
Figure 3. PRBS generator setup
If this product is not used as specified, the protection provided by the equipment
could be impaired. This product must be used in a normal condition (in which all
means for protection are intact) only.
Summary of Contents for N4965A
Page 1: ...Getting Started Guide Keysight N4965A Multi Channel BERT 12 5 Gb s ...
Page 2: ......
Page 8: ...8 Multi Channel BERT 12 5 Gb s User Guide ...
Page 21: ......
