Keysight N4965A, Getting Started Manual

Page: 17 / 22

Multi-Channel BERT 12.5 Gb/s User Guide
17
9. Rotate the knob until the highlighted text shows ON then press the softkey
corresponding to the EXIT label to accept the change. This will turn on the
data output. The channel ID LED of the N4955A-P12/N4955A-D12 should
come on.
10. Position the arrow next to the Clk Output label on the N4965A then press the
softkey corresponding to the EDIT label.
11. Rotate the knob until the highlighted text shows ON then press the softkey
corresponding to the EXIT label to accept the change. This will turn on the
clock output.
12. Verify that the waveform is similar to the one shown in Figure 4.
Figure 4. Installation setup waveform