Keysight N109228CA OIF CEI 3.1, Getting Started

Page: 20 / 94

1 Introduction
20 OIF CEI 3.1 Compliance and Debug Application Getting Started
Starting the N109228CA OIF CEI 3.1 Compliance Test Application
After you install the N109228CA OIF CEI 3.1 Compliance Test Application on a PC (with or without
the N1010A FlexDCA interface) or on the N1000A or 86100D Oscilloscope, refer to the following
sections to start the N109228CA OIF CEI 3.1 Compliance Test Application:
• If the N109228CA OIF CEI 3.1 Compliance Test Application and the N1010A FlexDCA Software
are installed on the same PC and the DCA-X or DCA-M Oscilloscope is being accessed remotely,
see “Starting the N109228CA OIF CEI 3.1 Compliance Test Application” on page 53.
• If the N109228CA OIF CEI 3.1 Compliance Test Application is installed on a PC (but the N1010A
FlexDCA Software is not installed) and the DCA-X or DCA-M Oscilloscope is being accessed
remotely, see “Starting the N109228CA OIF CEI 3.1 Compliance Test Application” on page 77.
• If the N109228CA OIF CEI 3.1 Compliance Test Application is installed on the N1000A or 86100D
Oscilloscope, see “Starting the N109228CA OIF CEI 3.1 Compliance Test Application” on
page 92.