OIF CEI 3.1 Compliance and Debug Application Getting Started
77
Installing N109228CA on a PC Without N1010A FlexDCA
3
Starting the N109228CA OIF CEI 3.1 Compliance Test Application
After you install the N109228CA OIF CEI Compliance Test Application on a PC without the N1010A
FlexDCA interface, follow the steps below to start the N109228CA OIF CEI 3.1 Compliance Test
Application:
1 Ensure that the 86100D or N1000A Oscilloscope is added to the Keysight Connection Expert and
that the connection is active. Refer to
“Adding 86100D or N1000A to Keysight Connection
2 From the Windows
Start
menu, navigate to
Start>All Programs>Keysight FlexDCA
Applications>N109228CA OIF CEI 3_1
and click
Launch 'N109228CA OIF CEI 3_1'
.
3 The N109228CA OIF CEI 3.1 Compliance Test Application banner appears followed by the
Connect to FlexDCA
dialog.
Figure 77
N109228CA OIF CEI 3.1 Application launching banner
4 Enter the SICL address or VISA alias, if known, else select the
Select from Keysight Connection Expert
option to find the SICL Address/VISA alias.
5 Click
OK
to connect.
The default view of the N109228CA OIF CEI 3.1 Compliance Test Application appears.
