28
N1000A Quick Start Guide
2
Installing the N1000A
Step 7. Turn On the Instrument
1
Press the
ON/Standby
switch.
Figure 11
Location of ON/Standby Button
2
Wait while the instrument boots up. During the process, you will be asked to
accept the Windows 10 End User License Agreement (EULA). Once accepted
the N1000A will continue to configure itself.
3
After the instrument boots up, the FlexDCA oscilloscope application appears
and looks similar to the following figure.
Figure 12
FlexDCA Oscilloscope Application
CAUTION
Before switching on this instrument, make sure the supply voltage is in the specified
range. Refer to
Table 2
on page 22.
Summary of Contents for N1000A DCA-X Series
