Keysight M9485A, Startup Manual

Page: 34 / 43

34
Getting Started
STEP 3. Install the Network Analyzer Modules
12.You have now completed the hardware installation procedure.
NOTE
Connect or disconnect the cable of the DUT to the test port
3 Y9485-61603 M9340A B Out 1 Divider LO In
4 Y9485-61604 M9340A A Out 3 Divider Source In
5 Y9485-61605 M9340A A Out 2 Divider Source In
6 Y9485-61606 M9340A A Out 1 Divider Source In
7 Y9485-61617 M9340A B Out 3 Divider 100MHz In
8 Y9485-61618 M9340A B Out 2 Divider 100MHz In
9 Y9485-61619 M9340A B Out 1 Divider 100MHz In
h M9485-61626 M9340A A In M9340A A Out 2
i M9485-61623 M9340A A Out 2 M9340A B In
j M9485-61621 M9340A A In M9309A RF/LO Out
k M9485-61605 M9300A Out 5 M9309A 100MHz In
l M9485-61606 M9300A Out 4 M9340A B In
m
M9485-61609
M9340A Sync M9340A A Sync
n M9485-61604 M9377A Trig M9377A I/O2 Sync
No Cable Part Numbers Connection 1 Connection 2 Note