Keysight M9485A, Startup Manual

Page: 29 / 43

29
Getting Started
STEP 3. Install the Network Analyzer Modules
Figure 1-22 Cable Connections For Wide Dynamic Range Configuration
e. Figure 1-23 on page 29 below shows the cable connection for high gain
measurement.
Figure 1-23 Cable Connections For High Gain Measurement Configuration
f. For Configurable Test Set measurement, correct jumper cable has to be
selected and connected between test ports. Jumper cables for the
Configurable Test Set comes with color coding to ease cable selection.
Figure 1-24 on page 29 below shows the jumper cable used for
Configurable Test Set.
Figure 1-24 Jumper Cable For DRA Measurement
g. As shown in the figure above, the color coding and the connector
number on the jumper cable indicates the measurement it should be
used for and the connection between ports.