Keysight M9485A, Startup Manual

Page: 33 / 43

33
Getting Started
STEP 3. Install the Network Analyzer Modules
Figure 1-28 Cable Connection of 2 Chassis with Configurable Test Set and Standard
Receiver or Direct Access Receiver (with 2-Way Divider) - 2
11. Figure 1-27 on page 32 and Figure 1-28 on page 33 shows cable
connection of 2 chassis with configurable test set and either standard or
direct access receivers, with 2-way dividers. There are many options of
configuration and this is one of them. For connection as this, a set of cables
as shown in Table 1-8 on page 33 , are required.
Table 1-8 Part Numbers of Required Cables for Connection
No Cable Part Numbers Connection 1 Connection 2 Note
a 1250-4189 M9340A B In is SMB-SMA Adapter.
Fix this adapter before
connecting the cable.
M9340A B In
b 8120-5091 M9310A 100MHz In M9309A 100MHz Out Flexible cable
M9309A 100MHz In M9309A 100MHz Out
c M9485-61619 M9310A RF In M9309A RF/LO Out
d M9485-61625 M9340A A Out 3 M9340A A In
e M9485-61622 M9310A RF Out M9340A A In
f M9485-61624 M9340A A Out 3 M9340A B In
g M9485-61607 M9300A Out 3 M9340A B In Flexible cable
1 Y9485-61601 M9340A B Out 3 Divider LO In
2 Y9485-61602 M9340A B Out 2 Divider LO In