Keysight ixia UHD100T32, Getting Started Manual

Page: 42 / 48

1. Open a serial connection or an SSH connection from your terminal emulation application.
The KCOS console prompts you to sign in.
2. Enter the following credentials:
l
User ID: admin
l
Password: admin
The command line interface prompt appears.
3. Type
kcos-control-reboot
.
UHD100T32 runs an orderly shut down of all processes, and then restarts the system. The operation
may take several minutes to complete.
Shut down UHD100T32
We recommend you to use the KCOS console to shut down UHD100T32.
To shut down UHD100T32, do the following:
1. Open a serial connection or an SSH connection from your terminal emulation application.
The KCOS console prompts you to sign in.
2. Enter the following credentials:
User ID: admin
Password: admin
The command line interface prompt appears.
3. Type
shutdown
.
4. Select Enter to start the graceful shutdown.
UHD100T32 runs an orderly shut down of all processes, and then turns off the system.
Chapter 4 How do I...
– 29 – 913-2626-01