Keysight ixia UHD100T32, Getting Started Manual

Page: 20 / 48

BMC Console
OOB Ethernet
Type-A USB
2x16 QSFP Ports
Status LED
Debug Connector
Channel Status Lamps
A group of four triangular lamps is present between the top and bottom or an odd and even pair of
QSFP ports. These are the port channel status lamps.
Based on the setting that you have chosen by using the port LED selector button, the four lamps
indicate either the state of the MAC channels on the QSFP ports above the lamps, or the states of the
MAC channels on the QSFP ports below the lamps.
The following image shows the port channel status lamps:
LED Selector Button and Bank Indicator Lamps
The port LED Selector button is located at the lower right of the front panel, and is labeled LED Select.
There are two bank indicator lamps labeled TOP and BOT to the right of the button. These lamps
indicate whether all the port lamps are showing the port state for TOP or BOT.
You can press the LED Selector button to toggle between the two states.
The following image show the LED Selector button and the bank indicator lamps:
Chapter 1 About UHD100T32
– 7 – 913-2626-01