Keysight ixia UHD100T32, Getting Started Manual

Page: 37 / 48

4. Use the
kcos-show-interface-status
command to return the system's IP address as follows:
Note:
If your network does not have a DHCP service available, configure a static IP address, as
described in the next section.
Method 2: Configure static IP
If you are not using DHCP-based IP addressing, you will need to configure a static IP address. Static IP
configuration requires that you use the RS232 port or the keyboard.
To configure the static IP address, do the following on the UHD100T32 KCOS console:
Chapter 4 How do I...
913-2626-01 – 24 –