Keysight E1418A Option 002 Service Manual Download Page 27 | Manualshive

Page: 27 / 106

background image

Keysight E1418A Service Guide

21

Preventive Maintenance

Operating Information

Preventive Maintenance

Preventive maintenance consists of periodically cleaning the front panel, the
terminal module, and performing the Operator’s Check. Clean the module and
terminal module yearly, or more often if the module is used in very dusty or
humid areas. Disassembly of the module is not recommended for cleaning.
However, if the module is disassembled for repair or reconfiguration, the printed
circuit board assemblies (PCAs) can be blown off with a properly grounded air
gun. Remove the terminal module cover to blow dust off the terminal printed
circuit board and case. Table 3-1 shows the recommended cleaning equipment
and supplies.

Table 3-1

Recommended Cleaning Equipment and Supplies

Description

Recommended Use

Mild Soap Solution

Clean face plate panel and terminal covers.

Lint-free Cloth

Clean face plate panel and terminal covers.

Airgun with grounded
nozzle

Remove dust from the printed circuit boards and
terminal case.

To eliminate possible electrical shock, disconnect ac

power from the mainframe and disconnect all outputs to

the terminal module before removing the module from the

mainframe.

The printed circuit assemblies (PCAs) contain static-sensitive

devices that can be damaged by careless handling. Use

static-control devices (wrist straps, mats, and tools) when

handling the module. Chapter 6 contains additional precautions

for electrostatic discharge (ESD).

«
...
25
26
27
28
29
...
»

Summary of Contents for E1418A Option 002











































































































Reviews:

No comments

Related manuals for E1418A Option 002

LaCinema Mini HD Connect

Brand: LaCie Pages: 4

blueplanet 87.0 TL3

Brand: Kaco Pages: 200

Brand: Enerdrive Pages: 24

Brand: Transition Networks Pages: 13

LaCinema Mini HD Connect

Brand: LaCie Pages: 74

SITE INVERTER 300

Brand: ICT Pages: 8

B+B SmartWorx 485USB9F-2W

Brand: Advantech Pages: 2

Brand: DeLOCK Pages: 2

Brand: Lechpol Pages: 2

Brand: Dometic Pages: 292

Brand: Littfinski Daten Technik Pages: 2

Brand: MODIX Pages: 26

Brand: TBM Pages: 6

Brand: Cobalt Digital Inc Pages: 62

Brand: V-TAC Pages: 32

Delphi E48SR05012NRFA

Brand: Delta Electronics Pages: 15

Integrated Multi-Application Generator

Brand: Telrad Pages: 61

Brand: Brunner Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands