manualshive.com logo in svg

Keysight 16861A, Installation And Quick Start Manual

Share
Download
Keysight 16861A Installation And Quick Start Manual Download Page 46

46

Keysight 16860 Series Portable Logic Analyzers Installation/Quick Start Guide

4

Solving Problems

 

To run the recovery process

1 Shut down and then restart your Logic Analyzer.

While booting up, the Logic Analyzer displays the Windows Boot 

Manager screen. This screen provides you the following options:

•

Microsoft Windows 7 or 10

 (as per the installed operating system) - 

This is the default selected option. This option starts the Logic 

Analyzer with the installed Windows operating system. This is the 

normal startup of the system.

•

Keysight Recovery system 

- You should select this option when you 

want to restore/repair your Logic Analyzer software by running the 

Keysight recovery process.

2 After a few seconds, Logic Analyzer automatically starts with the option 

selected in the Windows Boot Manager. Select the 

Keysight Recovery 

CAUTION

Running the recovery process reformats your logic analyzer’s hard disk drive to the state 

in which it was originally shipped to you. All user data files and programs are overwritten 

when the recovery process runs. Therefore, save your data to a CD or to another machine 

before you start recovering the system software.

Summary of Contents for 16861A





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands