U3020AS62
Front and Rear Panel Features
Figure 3
Rear Panel
GPIB Connector
This connector allows the Test Set to be connected directly to a controller.
GPIB address = 26
.
page 21, "GPIB Address Command"
for information to change the address.
LAN
The instrument is controlled over Local Area Network (LAN).
Line Input
The line input contains the power cord receptacle.
Install the instrument so that the detachable power cord is readily identifiable and is easily
reached by the operator. The detachable power cord is the instrument disconnecting device. It
disconnects the mains circuits from the mains supply before other parts of the instrument. The
front panel switch is only a standby switch and is not a LINE switch. Alternatively, an externally
installed switch or circuit breaker (which is readily identifiable and is easily reached by the
operator) may be used as a disconnecting device.
GPIB
LAN
Line Input
12
Keysight U3020AS62 User's and Service Guide
Always use the three-prong AC power cord supplied with this product. Failure
to ensure adequate earth grounding by not using this cord may cause product
damage and the risk of electrical shock.
