U3020AD01
Instrument Settings
If you change the DHCP setting, you must cycle power on the U3020A to
activate the new setting.
Example
:
The following command disables DHCP:
SYST:COMM:LAN:DHCP OFF
The following query returns the current DHCP setting:
SYST:COMM:LAN:DHCP?
Typical Response: 0
Auto-IP Address Command
Description
This command
will
disable or enable the use of Auto-IP standard to automatically assign an IP
address to the U3020A when on a network that does not have DHCP servers.
Syntax
SYSTem:COMMunicate:LAN:AUTOip {OFF|0|ON|1}
SYSTem:COMMunicate:LAN:AUTOip?
Example
The following command disable the Auto-IP:
SYST:COMM:LAN:AUTOIP OFF
The following query returns the current Auto-IP setting:
SYST:COMM:LAN:AUTOIP?
Typical Response: 0
DHCP Command
Description
This command disables or enables the use of the Dynamic Host Configuration Protocol (DHCP).
Syntax
SYSTem:COMMunicate:LAN:DHCP {OFF|0|ON|1}
SYSTem:COMMunicate:LAN:DHCP?
When DHCP is enable (factory setting), the instrument will try to obtain an IP address from the
DHCP server. If a DHCP server is found, it will assign a Dynamic IP address, Subnet Mask, and
Default Gateway to the instrument.
When the DHCP is disable or unavailable, the instrument will use the Static IP address, Subnet
Mask, and Default Gateway during power-on.
Keysight U3020AD01 User's and Service Guide
26
