8
Keysight U1701B Quick Start Guide
8
Keysight U1701B Quick Start Guide
ENGL
ISH
To enable relative function
– Relative function shows the difference between
the measured value and the offset reference value.
The display may show a non-zero value due to the
presence of test leads. Use the relative function to
nullify the residual.
– Relative function can operate in both auto and
manual ranging mode but the function cannot be
set when an overload value exists.
–
REL
annuciator will be displayed.
Press
To renew the relative value
Press
again
To exit relative mode
Press
for
more than 1 s
To select manual range and to turn off the
AUTO
annunciator
Press
To step up a range at a time
Press
again
To select auto-range
– In auto range mode, the
AUTO
annunciator is
displayed and the instrument will select an
appropriate range for resolution if the reading is
greater than the maximum available range.
OL
will
be displayed.
– The instrument will select a lower range when the
reading is less than 9% of full scale.
Press
for
more than 1 s
To enable the tolerance mode and to set the display
value as a standard reference
–
TOL
annunciator will be displayed.
– The tolerance will be displayed on the secondary
display.
– The instrument range will be locked.
Press
To exit tolerance mode
Press
and
hold for more than 1 s
Actions
Steps
